|
Protective Coating Selection for Concrete, Steel and Industrial Exposure Areas Industrial surfaces are constantly exposed to conditions that can reduce durability, damage substrates and increase maintenance requirements. Concrete floors, steel structures, damp walls, utility areas and chemical-exposed zones all face different types of stress. Because of this, protective coating selection should not be treated as […]
Industrial Flooring Product Guide for Warehouses, Factories and Parking Decks Introduction Industrial floors are working surfaces. They support production, material movement, storage, machinery, vehicles, cleaning and maintenance every day. Unlike ordinary building floors, they may be exposed to forklift traffic, trolley wheels, impact, abrasion, oil, water, dust, vibration and changing operational loads. A flooring system […]
Concrete Admixture Selection for RMC, Precast and Block Manufacturing Introduction Concrete admixtures are added in relatively small quantities, but their effect on concrete production can be significant. The correct admixture can support workability, pumping, setting control, water reduction, early strength, surface finish and production consistency. However, the same admixture should not be selected for every […]
Introduction India’s infrastructure sector is developing at remarkable speed. Highways, airports, metros, railway networks, industrial facilities, bridges, smart cities and urban development projects are changing the country’s economic and physical landscape. As the scale of development grows, the construction industry must address an important question: How can infrastructure be delivered rapidly while maintaining quality, durability, […]
Introduction The construction industry is rapidly changing. Projects are becoming larger, construction timelines are becoming shorter and expectations regarding durability, sustainability and lifecycle performance are continuously increasing. In this environment, construction chemicals play an essential role in helping engineers, contractors, builders and infrastructure professionals achieve better-performing structures. Waterproofing systems help control water ingress. Concrete admixtures […]
Engineering Grout for Machinery Foundations and Base Plates Machinery and industrial equipment are commonly installed over reinforced-concrete foundations. Although the machine rests on a steel base plate, the base plate does not usually make direct and complete contact with the concrete foundation. A designed gap is left between the base plate and the foundation so […]
Concrete Repair Mortar and Crack Repair Product Selection Guide Concrete cracks, spalling, damaged edges and surface deterioration are common problems in residential, commercial, industrial and infrastructure structures. However, not every concrete defect should be treated using the same repair material. A narrow surface crack may require a compatible crack-filling product. A damaged floor edge may […]
Terrace Waterproofing Before Monsoon: Technical Checklist for Contractors and Homeowners Terrace leakage is one of the most common building problems during monsoon. In many cases, leakage does not start because of heavy rain alone. It starts because small cracks, weak joints, blocked drains or damaged coatings were ignored before the rainy season. Before monsoon, every […]
Best Waterproofing Products for Terrace, Basement and Wet Areas. Water leakage is one of the most common and expensive problems in buildings. Whether it appears as terrace leakage, basement seepage, bathroom dampness, water tank leakage or wall moisture, the actual issue is usually deeper than what is visible on the surface. Many waterproofing failures happen […]
Common tile Fixing Mistakes That Cause Debonding and How to Avoid Them Tile debonding is one of the most common complaints in tile installation work. A tile may look properly fixed on the first day, but after some time, problems such as hollow sound, loose tiles, cracked joints, water seepage, uneven levels or complete tile […]