|
A mould release agent is a chemical substance that creates a moulding surface barrier so that products don’t get stuck to a mould. We are well aware of the need to use mould release agent for concrete and formwork, as it is very crucial to prevent the concrete from sticking to the surface of the […]
FAIRCURE WX WHITE is a wax based concrete curing compound. It is white coloured curing compound. When it is applied on the concrete surface, it forms a continuous layer of wax over it. The wax layer remains on the surface of concrete, but do not penetrate into surface. It only breaks by natural weathering or […]
With time the hardened concrete loses its ability to hold the binding concrete materials together due to weathering or atmospheric condition. Concrete repair products are used to repair building cracks, surface scaling, damaged or chipped out concrete surface etc. Benefits of Concrete: 1) Prevents Longevity 2) Prevents further damage to concrete 3) Reduces the risk […]
Stamp concrete is a decorative and intelligent approach for exterior floor surfaces. This approach to exterior floor surfaces is very cost effective and there are lot of design options available such as surface resembling to paver, flagstone, slate, worn rock, bricks, stones, tiles or wood with various colour options. Further coating of stamp concrete can […]
Is it possible to have a water vapour permeable system which gives excellent waterproofing to the substrate? Yes absolutely, Our EPOAQUA SL product is water based epoxy, water vapour permeable system. It is known that concrete surface has some water which does not bond with the cement and is later evaporated due to the hydration […]
We are very proud to announce that Fairmate Chemicals is making the complete range of polycarboxylate ether with a capacity of 40,000 MT per year. We have also developed bio-based PCE that reduces the environmental impact to a great extent. Hence, our entire range of BROCRETE products is made from bio-based PCE. The availability of […]
Why do we need water proofing? There is a simple answer to this. Water proofing is required to stop the ingress of water in the structure making it water resistant. It acts as a protective coating from other elements as well such as oil and grease, chemical attacks, acid rain etc. The dual purpose of […]
Benefits 1. High early strength (even at low temperatures). 2. Very good flow characteristic. 3. Fast set times & fast strength gain. 4. Consistency can be adjusted as per requirement. 5. High 28 day strengths. 6. Does not bleed or segregate. 7. Very good impact and thermal resistance. 8. Non corrosive to steel or iron. […]
Buildings have major environmental impacts over their entire life cycle. Resources such as ground cover, forests, water, and energy are depleted to give way to buildings. A green building depletes the natural resources to the minimum during its construction and operation. The aim of a green building design is to minimize the demand on non-renewable […]
Pervious Concrete is a special type of concrete that has a high porosity so that water can percolate through it easily. The major advantage of this type of concrete is that it can be used in the areas where it is very important to remove the stagnant and there is no proper draining facility for […]