{"id":428,"date":"2022-10-12T16:56:49","date_gmt":"2022-10-12T11:26:49","guid":{"rendered":"https:\/\/www.prashita.net\/blog\/?p=428"},"modified":"2022-10-12T16:56:49","modified_gmt":"2022-10-12T11:26:49","slug":"flowgrout-60","status":"publish","type":"post","link":"https:\/\/www.fairmateprashita.com\/blog\/flowgrout-60\/","title":{"rendered":"FLOWGROUT 60"},"content":{"rendered":"

ULTRA HIGH STRENGTH, FREE FLOWING, NON-SHRINK CEMENTITIOUS GROUT<\/p>\n

FLOWGROUT 60 is based on specially processed cement containing fillers and additives. FLOWGROUT 60 is supplied as ready-to-use grout requiring the addition of a precise quantity of water at the site (3.750 to 4 Litre\/25 Kg Grout). FLOWGROUT 60 is suitable for gap widths of between 10mm – 50mm. For thickness over 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 20% of the quantity of grout used. This reduces the heat of hydration.
\nExpansion: Controlled expansion occurs in the unset material to ensure that the grout, when cured will continue to occupy its original volume within the confines of the voids in which it was placed. For thicker sections, it is necessary to fill out the grout with well-graded silt free aggregate to minimize heat buildup.<\/p>\n

SALIENT FEATURES
\n\u2022 Prepacked, factory controlled consistent material needing only addition of water
\n\u2022 Shrinkage offset by expansion to ensure original volume is retained
\n\u2022 Free flowing, self-leveling grout
\n\u2022 Can withstand temperature up to 200\u00baC
\n\u2022 Easy placement and filling of underbases of machinery
\n\u2022 Non-metallic, non-toxic and chloride free
\n\u2022 Holds up to industrial machinery vibration & impact
\n\u2022 Extended work time for easy placement
\n\u2022 Excellent adhesion to concrete and steel
\n\u2022 Non staining
\n\u2022 High ultimate strength and durability<\/p>\n

APPLICATION PROCEDURE<\/p>\n

Surface Preparation:
\n\u2022 All contaminated surfaces must be cleaned thoroughly by chemical or mechanical methods.
\n\u2022 All bolt pockets and under bases must be free from dust, laitance, and of sound substrate. If needed, substrate with water to allow for full absorption for at least 24 hours.
\n\u2022 Just before the grouting is to commence, all water must be removed completely leaving the surface only damp.<\/p>\n

Mixing: Mechanical mixing using a grout mixer or concrete mixer is recommended.
\n\u2022 Place 80% of the water required in a concrete mixer (100% water in case of a grout mixer).
\n\u2022 Slowly add the required amount of FLOWGROUT 60 while mixing continuously for 1 minute. Add balance quantity of water (20%) and mix for 3 to 5 minutes. This will provide a smooth even consistency of grout.<\/p>\n

Bolt Packets:
\n\u2022 Depending on the size of the bolt pockets, 50- 100% cleaned 10mm sound aggregates by weight of grout consumption may be sealed incorporated to economies on grout and also to keep the heat of hydration low.
\nUnder base Plate:
\n\u2022 Leak proof strong formwork must be provided to withstand operational stresses while grouting and all edges must be sealed with FLOWGROUT 60 troweling consistency to arrest the grout flowing out of formwork.
\nCURING:
\n\u2022 3-4 hours after grouting, all exposed areas must be cured with wet hessian cloths (keep wet always) or water ponding wherever possible for minimum 7 days.<\/p>\n

\"\"<\/p>\n

FLOWGROUT 60 can be used to Bolt pockets and base plate grouting of all equipment, Crane, stanchion bases and all types of machinery with dynamic load.<\/p>\n

PACKING
\n FLOWGROUT 60 is supplied in 25 Kg. lined HDPE bag<\/p>\n","protected":false},"excerpt":{"rendered":"

ULTRA HIGH STRENGTH, FREE FLOWING, NON-SHRINK CEMENTITIOUS GROUT FLOWGROUT 60 is based on specially processed cement containing fillers and additives. FLOWGROUT 60 is supplied as ready-to-use grout requiring the addition of a precise quantity of water at the site (3.750 to 4 Litre\/25 Kg Grout). FLOWGROUT 60 is suitable for gap widths of between 10mm […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[22],"tags":[],"class_list":["post-428","post","type-post","status-publish","format-standard","hentry","category-engineering-grouts"],"_links":{"self":[{"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/posts\/428","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/comments?post=428"}],"version-history":[{"count":1,"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/posts\/428\/revisions"}],"predecessor-version":[{"id":430,"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/posts\/428\/revisions\/430"}],"wp:attachment":[{"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/media?parent=428"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/categories?post=428"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.fairmateprashita.com\/blog\/wp-json\/wp\/v2\/tags?post=428"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}